With hefty power, superior fidelity, and a 3-input mini-mixer, the JBL EON10 G2 Speaker Cabinet is a rugged and capable performer in small PA and AV applications and sound systems.
The PA speaker’s built-in amplifier delivers 125W for driving the improved 10″ woofer with neodymium magnet while 50W drive the 1″ compression driver with titanium diaphragm and ferro-fluid cooling resulting in high-quality sonic performances. Combined with the EONSUB G2 powered Subwoofer the EON10 offers a full-range PA system for small to medium events and venues.
The 3-input mini mixer permits flexible speaker configuration while an additional XLR output lets your daisy-chain multiple EON speakers. The JBL Thermomaster Total Thermal Management System keeps the EON 10 cool without the use of heat sinks or fans helping to assure long life.
A versatile speaker cabinet design allows you use the EON 10 in many ways. As an FOH speaker, the EON 10 can be placed on a flat horizontal surface, mounted on speaker stands for improved projection, or placed securely on the EONSUB Subwoofer. The JBL speaker’s angled back allows it to be also used as a stage monitor.
- 125W drives 10″ woofer with neodymium magnet
- 50W drives 1″ compression driver with titanium diaphragm and ferro-fluid cooling
- Combines with EONSUB G2 powered Subwoofer for a full-range small to medium PA system
- 3-input mini mixer for flexible speaker configuration
- Additional XLR output for daisy-chaining multiple EON speakers
- Flexible mounting and positioning for use as FOH or stage monitor use
- Freq. Range (-10 dB): 65 Hz – 18 kHz
- Freq. Response (±3 dB): 90 Hz – 16 kHz
- Horiz. Coverage (-6 dB): 90 nominal
- Vert. Coverage (-6 dB): 60 nominal
- Rated Maximum SPL: 117 dB, @ 1 m (3.3 ft)
- Dimensions (H x W x D): 493 mm x 356 mm x 307 mm (19.4 in x 14.0 in x 12.1 in.)
- Net Weight: 10.4 kg (23 lbs.)
- LF Driver: Integral frame with one 10″(254 mm) driver, dual neodymium magnet, 1.5″Differential-Drive voice coil.
- HF Driver: JBL2412 1″(throat diameter) compression driver with titanium diaphragm. Ferro-fluid cooled.
- Amplifier Power LF: 125 watts @ low-frequency driver impedance
- Amplifier Power HF: 50 watts @ high-frequency driver impedance.
- Input 1 Sensitivity: -48 dBu to 0 dBu for rated output (Mic/Line switch in MIC position) -6 dBu to +20 dBu for rated output (Mic/Line switch in LINE position)
- Input 2 & 3 Sensitivity: -12 dBu to +20 dBu for rated output
- Output Level: +26 dBu (peak), Loop/Mix switch in MIX position
- Audio Connectors
- Input 1: XLR/F, balanced Audio Connectors Input 2 & 3: Single TRS 1/4″Phone Crossover Freq: 2.7 kHz Loop/Mix Out: XLR/M, balanced.
- AC Input: 110 – 230 VAC, 50 – 60 Hz, 100 watts rating per UL, detachable IEC power cable
